Description
Employers are able to reset a candidate’s clock count after a period of time of no work or that they have been absent. Where a candidate has not worked for 6 consecutive weeks, the clock count would be reset to zero and their rate would return to the pre-parity rate.
The reset for an absence is dependent on the type of absence and the length of time would need to be configured on the Absence Type.
The system needs to know whether it should pause the clock as it does not know this from Interpreter as it only processes received timesheets.
An automatic Windows service has been provided to check for missing timesheets as well as for leave requests that have been received but no timesheet. The Windows service runs on a specific day and time defined by you which would need to be at the end of your cut-off point for receiving of timesheets. It detects the missing timesheets or leave requests and updates the clock count accordingly:
Scenario | AWR Source | AWR Status | Clock Count |
|---|---|---|---|
Timesheets have not been received for more than the number of weeks defined in the setting Reset After Weeks Not Worked in either Office or Country and the candidate has not submitted a leave request. | No Timesheet | Reset | 0 |
Timesheets have not been received for less than the number of weeks defined in the setting Reset After Weeks Not Worked in either Office or Country and the candidate has not submitted a leave request. | No Timesheet | No Hours Pause | Carry forward of previous clock count |
A leave request is received and the candidate has not worked during the week. | Absence | Absence Pause | Carry forward of previous clock count |
A leave request is received and the candidate has exceeded the pause weeks | Absence | Reset | 0 |
Where a candidate did not submit a timesheet until after a pause or a reset has occurred (it is late), the clock count will automatically be adjusted.
Benefits
The system will automatically apply the pause and reset rules without any manual intervention.
Configuration
Clock Reset/Pause Assessment Day and Assessment Time needs to be defined in Hierarchy > Country > Agency Worker Regulations
The Reset After Weeks Not Worked needs to be defined in Hierarchy > Country > Agency Worker Regulations.
If you wish to have a different point at which the reset rule for non-receipt of timesheet is applied, this can be defined at office level.
Assign the number of weeks to pause an absence in the Absence/Attendance configuration. If no weeks are assigned against an absence, the clock count will be incremented.