...
In this article we will look at the STP reporting rules for paid leave and how you should configure FastTrack360 to ensure that you comply with the rules.
What are the requirements for reporting paid leave under STP Phase 2?
Under STP Phase 2 reporting requirements, payments made to Individual Non Business payees for leave taken, leave paid out during employment and leave paid out at termination of employment must be reported as year-to-date amounts that are disaggregated from other gross payments. The disaggregated amounts are reported under one of the following categories depending on the type of leave that is paid and the circumstances under which the payment is made:
P - applies to paid parental leave including Government Paid Parental Leave (GPPL) payments from Services Australia that are paid to the payee through payroll. Also applies to parental leave that is paid directly by the employer.
W - applies to Workers' compensation leave.
A - applies to ancillary leave such as leave taken for Australian Defense Force service, jury service, eligible community service, emergency service.
O - applies to all other leave types covered by the ruling SGR 2009/2 S32, 33, such as annual leave/annual leave loading, personal leave, rostered day off (RDO) leave, time off in lieu (TOIL), compassionate/bereavement leave, study leave and paid leave granted by an employer in response to specific circumstances.
C - applies to the following leave types when paid out during employment:
annual leave
annual leave loading (except where the applicable award/pay agreement stipulates that the leave loading is paid in compensation for loss of ability to work overtime)
personal/carers' leave (only where specifically allowable under the award/agreement)
rostered day off (RDO)
long service leave.
U - applies to the following types of leave when paid out as a gross payment at termination of employment:
annual leave
annual leave loading
long service leave.
Overtime - applies to the following types of leave when paid out during service:
...
Info |
---|
The disaggregated reporting of leave payments in STP applies to payees with a payee type/income type of Individual Non Business. For payees with a payee type/income type of Labour Hire, leave payments are reported as part of the payees' overall gross earnings amount instead of being disaggregated by type. |
How does FastTrack360 recognise the type of leave being paid?
Automatic payments for leave taken
At the Leave Payments pay batch stage in the Payroll module, an automatic payment is triggered for leave taken, assuming all other conditions for paying the leave are met, if a payee has any of the following in the pay batch:
...
For example, if the Paid Leave Type field on the leave type that is linked to leave request or absence item is set to Other Paid Leave (O), the amount that is paid for the leave taken is added to the year-to-date Paid Leave Type O amount that is reported in STP.
Manual payout of unused leave during employment
At the Leave Payments pay batch stage in the Payroll module, unused leave balances can be paid out by selecting the leave type to be paid out and manually triggering a payout action. As with automatic payments for leave taken, the system references the Paid Leave Type field on the corresponding leave type to determine how the payment is to be reported in STP.
...
Figure 2: Leave > Maintenance > Leave Type > Edit Leave Type > Leave Set > Deduction Rule Entry screen - Paycode and Leave Loading Paycode fields.
Manual payout of unused leave on termination of employment
At the Termination pay batch stage in the Payroll module, unused leave balances can be manually triggered to be paid out as one of the following types of payment:
...
Info |
---|
Other leave types that fall under the O category, including rostered day off (RDO), time off in lieu (TOIL) and personal/carers' leave, can be paid on termination as part of the Employment Termination Payment (ETP) amount and where that is the case, the payment is reported as part of the Termination Payments > Payee Termination Payment Taxable Component amount in STP and not as Paid Leave Type U. |
Payment of leave & making leave payment adjustments using manual pay items
In some cases it may not be practical to set up a leave type to facilitate payment of leave. For example, for some low-occurrence leave types, such as those covered by paid leave categories P, W and A, it may be practical to pay instances of leave taken using manual pay items. There are also circumstances where manual pay items might be used to adjust an overpayment or an underpayment of leave.
...
Note |
---|
If the payment is not linked to an absence item on a timesheet or a leave request and no option is selected in the STP Paid Leave Type field on the leave pay code, the payment will not be reported as paid leave in STP but instead it will be reported under general gross earnings, which means the payment might be misclassified. |
Configuration of Leave Types
The sections below describe in detail how each type of paid leave should be configured in FastTrack360 to ensure that leave payments for leave taken, for leave paid out during service and for leave paid out at termination of employment can be reported in STP in accordance with ATO requirements.
In each case, the leave configuration that is required in FastTrack360 to ensure that the leave payments are reported correctly is identified as is the process for making each type of leave payment in FastTrack360.
Annual Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate payment of leave taken at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered manually at the Leave Payments pay batch stage. | Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Paid Leave - Type C |
Payout at Termination of Employment |
Manually triggered as payment type of Gross at Termination pay batch stage. Info |
---|
This only applies to unused annual leave that is paid out as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes) and has accrued since 17/08/1993. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Paid Leave - Type U |
Manually Triggered as payment type Lump Sum A - Type R at Termination Pay batch stage. Info |
---|
This only applies to unused annual leave that is paid out as part of a genuine redundancy, invalidity or early retirement scheme. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Lump Sum A (Type R). |
Manually Triggered as payment type Lump Sum A - Type T at Termination Pay batch stage. Info |
---|
This only applies to unused annual leave that is paid out as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes) and has accrued before 17/08/1993. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Lump Sum A (Type T). |
Annual Leave Loading
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage when annual leave is paid, if annual leave is configured with a leave loading, based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the leave deduction rules must have a leave loading percentage defined. The leave loading pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered automatically when a cash out of annual leave is manually triggered at the Leave Payments pay batch stage. | Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage and the leave deduction rules must have a leave loading percentage defined. The loading pay codes on the leave deduction rules for Payout must be of one of the following pay code types: Overtime - this pay code type must be used to pay the cash out of the loading if the applicable award/agreement stipulates that the loading is in compensation for the loss of opportunity to work overtime. Leave - this pay code type must be used to pay the cash out of the loading if the loading is not in compensation for the loss of opportunity to work overtime.
| If paid against pay code type of Overtime, is reported as Overtime. Otherwise, is reported as Paid Leave - Type C |
Payout at Termination of Employment |
Manually triggered as payment type of Gross at Termination pay batch stage. Info |
---|
This only applies to unused annual leave loading that is paid out as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes) and has accrued since 17/08/1993. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the leave deduction rules must have a leave loading percentage defined. The leave loading pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Paid Leave - Type U |
Manually Triggered as payment type Lump Sum A - Type R at Termination Pay batch stage. Info |
---|
This only applies to unused annual leave loading that is paid out as part of a genuine redundancy, invalidity or early retirement scheme. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the leave deduction rules must have a leave loading percentage defined. The leave loading pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Lump Sum A (Type R). |
Manually Triggered as payment type Lump Sum A - Type T at Termination Pay batch stage. Info |
---|
This only applies to unused annual leave loading that is paid out as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes) and has accrued before 16/08/1993. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the leave deduction rules must have a leave loading percentage defined. The leave loading pay code referenced by the deduction rules must have a pay code type of Leave.
| Reported as Lump Sum A (Type T). |
...
Personal/Carers' Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered manually at the Leave Payments pay batch stage. Info |
---|
This leave type can only be cashed out in service under some awards/agreements. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage (if applicable) and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type C |
Payout at Termination of Employment |
Must be manually added to the ETP amount at the Termination pay batch stage. | | Must be reported as ETP |
Rostered Day Off (RDO) Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered manually at the Leave Payments pay batch stage. | Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type C |
Payout at Termination of Employment |
Must be manually included in the ETP amount. | | Must be reported Reported as ETP |
Time Off In Lieu (TOIL) Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage . Must be reported | Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered manually at the Leave Payments pay batch stage. | Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Overtime.
| Must be reported Reported as Overtime. |
Payout at Termination of Employment |
Must be manually included in the ETP amount. | | Must be reported Reported as ETP |
Compassionate/Bereavement Leave, Study Leave, Employer Special Circumstances Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
N/A - these leave types cannot be cashed out in service. |
Payout at Termination of Employment |
N/A - these leave types cannot be paid out on termination of employment. |
Paid Parental Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to P - Parental to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type P |
Cash Out of Leave in Service |
N/A - this leave type cannot be cashed out in service. |
Payout at Termination of Employment |
N/A - this leave type cannot be paid out on termination of employment. |
Workers' Compensation Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to W - Workers' Comp to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage . Must be reported as | Reported as Paid Leave - Type W |
Cash Out of Leave in Service |
N/A - this leave type cannot be cashed out in service. |
Payout at Termination of Employment |
N/A - this leave type cannot be paid out on termination of employment. |
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to A - Ancillary to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type A |
Cash Out of Leave in Service |
N/A - these leave types cannot be cashed out in service. |
Payout at Termination of Employment |
N/A - these leave types cannot be paid out on termination of employment. |
Long Service Leave
Leave Taken |
---|
How It's Paid in FastTrack360 Pay Module | Leave Configuration Required in FastTrack360 | How Does FastTrack360 Report the Payment in STP? |
---|
Paid automatically at the Leave Payments pay batch stage based on either of the following: an approved leave request linked to the leave type an absence item, linked to the leave type, on an approved timesheet.
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Leave Taken to facilitate automatic payment at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type O |
Cash Out of Leave in Service |
Triggered manually at the Leave Payments pay batch stage. | Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Payout to facilitate cashing out the leave balance at the Leave Payments pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported Reported as Paid Leave - Type C |
Payout at Termination of Employment |
Manually triggered as payment type of Gross at Termination pay batch stage. Info |
---|
This applies to long service leave accrued since 16/08/1993 that is paid as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes). |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported as Paid Leave - Type U |
Manually Triggered as payment type Lump Sum A - Type R at Termination Pay batch stage. Info |
---|
This only applies to unused long service leave that accrued since 16/08/1978 and is paid out as part of a genuine redundancy, invalidity or early retirement scheme. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported as Lump Sum A (Type R) |
Manually Triggered as payment type Lump Sum A - Type T at Termination Pay batch stage. Info |
---|
This only applies to unused long service leave that is paid out as part of a normal termination (i.e. reason for termination is not genuine redundancy, invalidity or early retirement schemes) and has accrued between 16/08/1978 and 16/08/1993. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported as Lump Sum A (Type T) |
Manually triggered as payment type of Lump Sum B at Termination pay batch stage. Info |
---|
This applies to long service leave accrued before August 1978. |
| Paid Leave Type in leave type record header must be set to O - Other to identify the leave type that is being paid for STP reporting purposes. Leave type must have deduction rule(s) for Termination to facilitate paying out the leave balance at the Termination pay batch stage and the pay code referenced by the deduction rules must have a pay code type of Leave.
| Must be reported as Lump Sum B |